Do you have a home theater at your home or digital projector at your office? Then you must be familiar with the problems of replacing the DLP bulbs quiet often. The normal age of these bulbs is about 2000 hours that can be enough for some people while it will be not too long for the majority of people. However, you can improve the working life of your bulbs by following some simple tips that you will get by reading this article.
The thing that you must avoid for improving the working life of your DLP bulbs is touching the bulb with bare hands. This very common problem could damage the DLP bulb. However, you can always touch any ordinary bulb with bare hands but you should understand that DLP bulb is different from ordinary bulb.
You should keep in mind that the DLP bulbs are much hotter in comparison to the ordinary bulbs, when in use. This is the reason that touching these bulbs with bare hands can cause some problems. If you touch the bulb with bare hand then you will find the traces of oil on the surface of the bulb and it will affect the picture screen of the visual media to which it is attached.
At first glance, it seems a minor problem but it shows the consequences slowly. The oil on the surface of the DLP bulbs will be burnt when the bulbs get hot and it will greatly reduce the life span of the bulbs. As the oil will be diffused with the light that is being projected. The picture quality of the projector screen is greatly reduced because of all this.
The next tip to improve the working life of the DLP bulbs is that you should always keep your projector in off mode only when you have turned the lamp off.
The third tips that can help you in increasing the working life of the DLP bulbs are that you should avoid the constant moves of the projector. In addition, you should take care of this thing especially when the projector is hot. It can have dangerous effect on the working life of the bulbs. The reason behind this is that when the projector is hot, the bulb does not have any tensile strength.
You can even compare it with the filament of any camp lantern. In addition, in such condition, the filament is same in consistency as is ash and this makes it highly susceptible to damages. Therefore, the projector should not be moved, when it is hot unless it is very necessary. The DLP bulbs are very sensitive even when they are not hot.
However, it becomes necessary to move the projector when its time of cleaning its filters. You should move it with great care so that there is no harm to the DLP bulbs. A little extra care can add some time to the working life of the bulbs.
hould allow the bulb to get cool. In this way, the cooling fans of the TV will do their work and will help in instant cooling of the bulb. Hence, in this way, there will be more contraction and expansion of the filament of the bulb. This will help in increasing the working life of the bulbs.
Published At: Isnare.com
Tidak ada komentar:
Posting Komentar